AquaCraft - Accessories

GrimRacer parts utilize top-grade materials such as machined aluminum (both anodized and polished), stainless steel and injection-molded plastic.
In addition to parts that can be shared by several boats, GrimRacer accessories are also available for specific models and classes.
Made BY boat racers, FOR boat racers!

AQUB9575 GrimRacer Precision Prop Balancer
Prop balancing is critical for maximizing a boat’s performance, as well as minimizing damage to electronics and parts. A precise bubble level is built into the one-piece extruded aluminum base. Three thumb screws provide perfect level adjustment. Comes with balancing shafts for 1/8”, 3/16” and 1/4” bore prop hubs.
Propeller not included.

AQUB9550 GrimRacer Cable Oil 50WT 32oz
Specially formulated for marine auto-oil drive systems. Comes in a 32 oz. easy-pour container with resealable cap.

AQUB9530 GrimRacer Starting Belt 15”
AQUB9531 GrimRacer Starting Belt 17”
AQUB9532 GrimRacer Starting Belt 19”
Racers know that starting belts are the absolute best way to start up a boat — and we’ve got them! Belts are tapered to easily fit on engine flywheels, and fiber reinforced for durability. A single wedge cog design provides a more secure grip. Available in 15”, 17” and 19” lengths, for use on .12- to .91-size engines.

AQUB9517 GrimRacer Silicon Jacket 36/45
Advanced tooling and technology make this lightweight, water-cooled silicon jacket a must for all Fast Electric boats. It directs water along the can surface of your 36-45mm diameter motor for extremely efficient heat removal. Two PVC tubes are included for connecting to your water cooling line.

AQUB9515 GrimRacer 18 Hydro Turn Fin-Polished
AQUB9516 GrimRacer 18 Hydro Turn Fin-Blue
These lightweight aluminum, adjustable turn fins improve the straightaway and left/right handling of .12 - .18 powered hydroplanes. Each comes with mounting bracket and bolts plus instruction manual.

AQUB9513 GrimRacer Cowl Locks (2)
Lightweight, stainless steel GrimRacer Cowl Locks work well on all types of R/C boats. They snap down tight and release easily with just a quick ¼ turn. Includes 2 complete sets per package with mounting brackets.

AQUB9514 GrimRacer Pro Radio Box Tape
Ideal for sealing radio box lids and hull hatches, this clear 3M electrical tape resists fuel, water, oil, and nitro fuel. Each roll contains 72 yards of tape...enough to last an entire racing season!

AQUB9500 GrimRacer Speed Grease Cable Lube
Designed for both electric and nitro boats, this waterproof blue lubricant — with specially formulated, “non sling” properties” — reduces friction and wear on flex cable and direct drive systems.

AQUB9503 GrimRacer Radio Box Seal Boot (2)
GrimRacer’s rubber seals have plastic reinforcement mounting supports and boots that stay supple and flexible over time. They fit 2mm to 4-40 size linkage wire.

AQUB9506 GrimRacer Hull Rubber Drain Plug
Water inevitably gets inside any boat’s hull, usually through the hatch or cowl. You usually have no alternative but to dump it out through the hatch opening. Mount GrimRacer’s Rubber Drain Plug onto your transom and you’ll be able to drain water easily without opening the hatch. With its convenient “T” handle, the plug can stay on the hull and not be lost in your pit box.

AQUB9501 GrimRacer Slide Cowl Lock (2)
Perfect for all hull styles, injection-molded Slide Cowl Locks install easily and feature a durable slide bolt locking mechanism. They're included as standard equipment on the U-18 Miss Vegas Nitro RTR Hydroplane.

AQUB9502 GrimRacer Waterproof Switch Boot
This switch cover includes an on/off plate with silicon switch boot cover. It fits nearly all standard on/off radio switch assemblies.

AQUB9504 GrimRacer Receiver Balloon (2)
Protect your receiver from moisture with GrimRacer’s elastic Receiver Balloon. One size fits all receivers. Two per package.

AQUB9505 GrimRacer Antenna/Cable Seal Boot (2)
Make your radio box water-tight — plug the exits for your antenna and throttle cable by fitting these rubber seals around their tubes. Flanged boots insert into the side or top of the radio box, with plenty of surface area to seal securely.

AQUB9509 GrimRacer Radio Box Foam
Cushion and protect your vital on-board radio gear by placing this foam around the receiver and receiver battery in your radio box.

AQUB7880 FE Rudder Blade

AQUB7882 FE MONO Starboard Turn Fin

AQUB7889 FE Rudder Bracket w/Hardware

AQUB9213 Header Cooling Coil

AQUB9522 FE MONO Port Turn Fin